We provide a Compliance based inspection & testing service as part of a Periodic Inspection regime / PPM for systems installed to facilitate Industrial Roped Access (abseil) services.
Where an abseil anchor system is installed in accordance with BS 8610:2017 to provide a suspension point for Industrial Roped Access / abseil a bi-annual inspection is required under LOLER as recommended under BS 7985:2013 Code of Practice for the use of Rope Access methods for Industrial Purposes.
The Lifting Operations and Lifting Equipment Regulations 1998 (LOLER) requires lifting equipment to be “thoroughly exaimined” by a competent person … at intervals not exceeding 6 months.
LOLER sets out that a thorough examination should be carried out as a minimum every 6 months where the lifting equipment and any associated accessories are used to lift people. What is covered by a Thourough examination will be determined by the examiner but will include an examination of all matters likely to affect the safety of the lifing equipment. Measurements of wear (in some cases traditional NDT and load testing.
It is the duty holders responsibility that the inspection/examination, maintenance and testing are carried out and that reports are issued and retained. We are able to carry out this service on behalf of the duty holder.